Intelligenter Hochleistungs-Dampfgenerator

Fully Intelligent High-Power Steam Generator (Electric-Heated)
Overall dimensions (L × W × H) 1100 × 700 × 1500 mm
Rated evaporation capacity 0.2 t/h
Rated steam pressure 0.1–0.7 MPa
Power / Power supply 144 kW, 380V / 50Hz
Drain pipe diameter DN25
Fully Intelligent High-Power Steam Generator (Gas-Fired)
Overall dimensions (L × W × H) 3850 × 2850 × 3000 mm
Rated evaporation capacity 0.5 t/h
Rated steam pressure 0.1–1.0 MPa
Power / Power supply 3.5 kW, 380V / 50Hz
Inlet water pipe diameter / pressure DN25 / 0.3–0.4 MPa
Gas consumption 40.0 Nm³/h
Gas pressure 5–10 kPa
Drain pipe diameter DN25
Exhaust pipe diameter DN200″

Fully computerized automatic control, unmanned operation, high efficiency, and low failure rate.

The output steam pressure can be set as required, conveniently and quickly. Steam is generated within 3 minutes, saving 80% of start‑up energy consumption. Equipped with variable‑frequency proportional control, it further achieves 10% energy savings during operation.

·No supervision inspection, approval application, or certified boiler operator is required, and no annual inspection is needed. Simple, convenient, and trouble‑free.
·High steam output – up to 1.2 tons per hour per unit – with high efficiency, capable of supplying multiple steam‑consuming heating devices simultaneously.
·Compact structure with a small footprint. No separate boiler room is required; it can be installed near steam‑consuming equipment, saving piping and reducing heat loss. It can also be placed outdoors.
·Safe to use. Due to its small water capacity, it is not classified as special equipment and poses no explosion hazard.
·Energy-saving and environmentally friendly. The machine is equipped with an imported premix burner with air‑gas linkage control, ensuring complete combustion, low exhaust gas temperature, and low NOx emissions. It fully complies with national environmental standards and achieves energy savings of up to 20%.
·Low operating and maintenance costs. It saves 30% fuel compared to conventional boilers, requires no manual operation or routine maintenance, and generates steam immediately upon switching on.”